How To Use
EZLIFEGO Tape
Before you start your next mounting project, follow these simple steps to prepare your surface, apply your tape and put your ideas in place.
Prep
Start with a clean, completely dry surface. Remove dust and residue, then plan the position of your item before applying EZLIFEGO mounting tape.
Tips
Preparation
- Gather your tape, scissors and the item you want to mount.
- Clean both contact surfaces and let them dry completely.
- Check the product instructions for the materials and weight of your item.
- Test a small, inconspicuous area before starting your project.
Apply
Cut the tape to the length you need and apply it to the back of your item. Press the tape into place so it makes even contact with the surface.
Plan the placement before removing the protective liner.
Tips
Surface Check
Choose a suitable mounting area and follow the instructions supplied with your tape. Surface condition, material and the item you are mounting all affect the finished bond.
Application
- Keep the adhesive clean while cutting and positioning the tape.
- Avoid touching the exposed adhesive.
- Apply the tape evenly, without folds or trapped debris.
- Use the amount of tape recommended for your project.
Peel & Press
Remove the protective liner, position your item and press firmly for 30 seconds. Check the placement and follow the product instructions before putting the item into use.
Tips
Finishing Your Project
- Line up the item before making contact with the mounting surface.
- Apply firm, even pressure across the taped area.
- Check the finished arrangement before use.
What Not To Do
- Do not apply tape over dust, moisture or loose surface material.
- Do not exceed the product instructions for your surface and load.
- Do not pull an attached item away abruptly; follow the product removal instructions.
Prep
Start with a clean, completely dry surface. Remove dust and residue, then plan the position of your item before applying EZLIFEGO mounting tape.
Tips
Preparation
- Gather your tape, scissors and the item you want to mount.
- Clean both contact surfaces and let them dry completely.
- Check the product instructions for the materials and weight of your item.
- Test a small, inconspicuous area before starting your project.
Apply
Cut the tape to the length you need and apply it to the back of your item. Press the tape into place so it makes even contact with the surface.
Plan the placement before removing the protective liner.
Tips
Surface Check
Choose a suitable mounting area and follow the instructions supplied with your tape. Surface condition, material and the item you are mounting all affect the finished bond.
Application
- Keep the adhesive clean while cutting and positioning the tape.
- Avoid touching the exposed adhesive.
- Apply the tape evenly, without folds or trapped debris.
- Use the amount of tape recommended for your project.
Peel & Press
Remove the protective liner, position your item and press firmly for 30 seconds. Check the placement and follow the product instructions before putting the item into use.
Tips
Finishing Your Project
- Line up the item before making contact with the mounting surface.
- Apply firm, even pressure across the taped area.
- Check the finished arrangement before use.
What Not To Do
- Do not apply tape over dust, moisture or loose surface material.
- Do not exceed the product instructions for your surface and load.
- Do not pull an attached item away abruptly; follow the product removal instructions.